Ebook: Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:

• Fracture & Fatigue
• Microscale & Microstructural Effects in Fatigue & Fracture
• Material Applications
• Composite Characterization Using Digital Image Correlation Techniques
• Multi-Scale Simulation and Testing of Composites
• Residual Stress
• Inverse Problems/Hybrid Methods
• Nano-Composites
• Microstructure Material Characterization
• Modeling and Uncertainty Quantification
• Impact Behavior of Composites

---

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:

• Fracture & Fatigue
• Microscale & Microstructural Effects in Fatigue & Fracture
• Material Applications
• Composite Characterization Using Digital Image Correlation Techniques
• Multi-Scale Simulation and Testing of Composites
• Residual Stress
• Inverse Problems/Hybrid Methods
• Nano-Composites
• Microstructure Material Characterization
• Modeling and Uncertainty Quantification
• Impact Behavior of Composites

---

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:

• Fracture & Fatigue
• Microscale & Microstructural Effects in Fatigue & Fracture
• Material Applications
• Composite Characterization Using Digital Image Correlation Techniques
• Multi-Scale Simulation and Testing of Composites
• Residual Stress
• Inverse Problems/Hybrid Methods
• Nano-Composites
• Microstructure Material Characterization
• Modeling and Uncertainty Quantification
• Impact Behavior of Composites

Content:
Front Matter....Pages i-ix
Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing....Pages 1-13
Deformation Mapping at the Microstructural Length Scale....Pages 15-20
Molecular Tailoring of Interfacial Adhesion Using Self-Assembled Monolayers....Pages 21-27
Micromechanical Characterization of Ductile Damage in DP Steel....Pages 29-35
MEMS Device for Fatigue Testing of 25 ?m Thick Aluminum Specimens....Pages 37-41
High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams....Pages 43-49
High Strain Rate Characteristics of Fiber Bragg Grating Strain Sensors....Pages 51-55
Dynamic Shape and Strain Measurements of Rotating Tire in Time-Series....Pages 57-66
Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions....Pages 67-74
Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings....Pages 75-87
Stress Intensity Factors for Viscoelastic Axisymmetric Problems Applied to Wood....Pages 89-96
Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers....Pages 97-104
Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions....Pages 105-109
Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137....Pages 111-123
Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing....Pages 125-131
Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired with a CFRE Composite System....Pages 133-142
Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083....Pages 143-147
Load History Dependency of Plastic Collapse Behavior of Cracked Piping....Pages 149-155
Production of Metal Matrix Composites Using Thixoinfiltration Techniques....Pages 157-164
Use of Vision-Based Methods for Measurement of Mechanical Properties of Exhaust Catalysts....Pages 165-171
Review of Methods for Determining Residual Stresses in Biological Materials....Pages 173-182
A Comparison of Residual Stress Measurements on a Linear Friction Weld Using the Contour Method and Neutron Diffraction....Pages 183-189
Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)....Pages 191-201
Very High-Cycle Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys....Pages 203-211
The Application of the Combined Creep and Rate-Independent Plasticity Model to Turbine Components Life Prediction....Pages 213-219
Modified Constitutive Relation Error Strategy for Elastic Properties Identification....Pages 221-228
Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains....Pages 229-235
Cohesive Zone Law Extraction from an Experimental Peel Test....Pages 237-245
Application of a New Experimental Method to Determine Bi-Material Interface Bonding Strength....Pages 247-254
Calibration of Barkhausen Noise for Residual Stress Measurement....Pages 255-266
Film Residual Stress Assessment Method via Temporarily Thermal Relaxation....Pages 267-276
Determining Residual Stresses with the Aid of Optical Interference Techniques....Pages 277-284
Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings....Pages 285-292
Design of Ultrasonic Probe Configuration Using Finite-Difference Time Domain Simulation....Pages 293-301
Absorbed Versus Released Energy in the Cracking Process of Heterogeneous Materials Under Compression....Pages 303-311
Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints....Pages 313-317
Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls....Pages 319-326
Modelling of Nosing for the Assembly of Aerospace Bearings....Pages 327-337
Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly....Pages 339-344
Development of a Test Simulator to Perform Optimized Experiment Design....Pages 345-347
Simplified Calculation Method of the Torsion Effect on the Seismic Behaviour of Timber Building....Pages 349-356
Experimental Analysis of Semi-rigidity Joint in the Standardized Timber Beam....Pages 357-366
Nano-Macro Correlation of Nano-Silica Concrete....Pages 367-370
Experimental Results of Green Wood Slice Under Natural Drying....Pages 371-378
Thickness Effect on Cross-Ply GLARE 5 FML Beams Subjected to Ballistic Impact....Pages 379-388
Hole-Drilling Residual Stress Measurement in an Intermediate Thickness Specimen....Pages 389-394
Effects of Strain’s Error on Residual Stresses Calculated by HDM....Pages 395-402
Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC....Pages 403-414
Anisotropic and Pressure-Dependent Plasticity Modeling for Residual Stress Prediction....Pages 415-427
Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder....Pages 429-435

---

Experimental and Applied Mechanics, Volume 4: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together 54 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on:

• Fracture & Fatigue
• Microscale & Microstructural Effects in Fatigue & Fracture
• Material Applications
• Composite Characterization Using Digital Image Correlation Techniques
• Multi-Scale Simulation and Testing of Composites
• Residual Stress
• Inverse Problems/Hybrid Methods
• Nano-Composites
• Microstructure Material Characterization
• Modeling and Uncertainty Quantification
• Impact Behavior of Composites

Content:
Front Matter....Pages i-ix
Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing....Pages 1-13
Deformation Mapping at the Microstructural Length Scale....Pages 15-20
Molecular Tailoring of Interfacial Adhesion Using Self-Assembled Monolayers....Pages 21-27
Micromechanical Characterization of Ductile Damage in DP Steel....Pages 29-35
MEMS Device for Fatigue Testing of 25 ?m Thick Aluminum Specimens....Pages 37-41
High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams....Pages 43-49
High Strain Rate Characteristics of Fiber Bragg Grating Strain Sensors....Pages 51-55
Dynamic Shape and Strain Measurements of Rotating Tire in Time-Series....Pages 57-66
Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions....Pages 67-74
Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings....Pages 75-87
Stress Intensity Factors for Viscoelastic Axisymmetric Problems Applied to Wood....Pages 89-96
Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers....Pages 97-104
Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions....Pages 105-109
Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137....Pages 111-123
Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing....Pages 125-131
Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired with a CFRE Composite System....Pages 133-142
Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083....Pages 143-147
Load History Dependency of Plastic Collapse Behavior of Cracked Piping....Pages 149-155
Production of Metal Matrix Composites Using Thixoinfiltration Techniques....Pages 157-164
Use of Vision-Based Methods for Measurement of Mechanical Properties of Exhaust Catalysts....Pages 165-171
Review of Methods for Determining Residual Stresses in Biological Materials....Pages 173-182
A Comparison of Residual Stress Measurements on a Linear Friction Weld Using the Contour Method and Neutron Diffraction....Pages 183-189
Experimental Study of High Speed Ball End Milling of Titanium Alloy (Ti-6Al-4V)....Pages 191-201
Very High-Cycle Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys....Pages 203-211
The Application of the Combined Creep and Rate-Independent Plasticity Model to Turbine Components Life Prediction....Pages 213-219
Modified Constitutive Relation Error Strategy for Elastic Properties Identification....Pages 221-228
Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains....Pages 229-235
Cohesive Zone Law Extraction from an Experimental Peel Test....Pages 237-245
Application of a New Experimental Method to Determine Bi-Material Interface Bonding Strength....Pages 247-254
Calibration of Barkhausen Noise for Residual Stress Measurement....Pages 255-266
Film Residual Stress Assessment Method via Temporarily Thermal Relaxation....Pages 267-276
Determining Residual Stresses with the Aid of Optical Interference Techniques....Pages 277-284
Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings....Pages 285-292
Design of Ultrasonic Probe Configuration Using Finite-Difference Time Domain Simulation....Pages 293-301
Absorbed Versus Released Energy in the Cracking Process of Heterogeneous Materials Under Compression....Pages 303-311
Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints....Pages 313-317
Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls....Pages 319-326
Modelling of Nosing for the Assembly of Aerospace Bearings....Pages 327-337
Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly....Pages 339-344
Development of a Test Simulator to Perform Optimized Experiment Design....Pages 345-347
Simplified Calculation Method of the Torsion Effect on the Seismic Behaviour of Timber Building....Pages 349-356
Experimental Analysis of Semi-rigidity Joint in the Standardized Timber Beam....Pages 357-366
Nano-Macro Correlation of Nano-Silica Concrete....Pages 367-370
Experimental Results of Green Wood Slice Under Natural Drying....Pages 371-378
Thickness Effect on Cross-Ply GLARE 5 FML Beams Subjected to Ballistic Impact....Pages 379-388
Hole-Drilling Residual Stress Measurement in an Intermediate Thickness Specimen....Pages 389-394
Effects of Strain’s Error on Residual Stresses Calculated by HDM....Pages 395-402
Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC....Pages 403-414
Anisotropic and Pressure-Dependent Plasticity Modeling for Residual Stress Prediction....Pages 415-427
Simulation of Triaxial Residual Stress Mapping for a Hollow Cylinder....Pages 429-435
....